Solar road stud used to mark road edges and centrelines.
Solar cat eyes road stud is mounted on the road surface and flashes to warn the drivers. Solar road stud is equipped with long lasting LEDs and runs for many years without maintenance. The LEDs are designed to be visible from a distance of about 1 km.
Due to its good outline of the solar cat eyes road stud, it greatly improves the safety of driving at night. A good solar road road should have three elements in the process of use: compression, continuous brightness, and firm installation. Most people pay attention to the first two points in the use process, but ignore the
installation of solar road studs. As a result, the falling off rate is very high in a short period of time.
Solar cat eyes road stud can be pasted with glue or cement. If you want to be more stable, you can fix them with nails. Solar charging can automatically light up at night and in rainy and foggy weather when the light is insufficient, which can guide the vehicle to the right direction and effectively ensure the traffic safety. Solar road stud is widely used because of its convenient installation and effective energy saving.
At present, asphalt glue and epoxy resin glue are mainly used in China to
install solar cat eyes road stud. The advantage of asphalt adhesive is that the curing time is short. But it has a fatal disadvantage: in summer, when the surface temperature reaches degrees, it will soften. Once the wheel is impacted, the solar cat eyes will fall off, or the softened black asphalt glue will be glued to the surface of the solar road stud, which will affect the reflective effect.
Therefore, the installation of
solar cat eyes road stud must use epoxy resin adhesive. There are so many kinds of epoxy resin adhesives on the market, but there are only two or three kinds of them that are suitable for the special purpose of road stud, and the proportion of curing agent must be reasonable.
