There are many typhoons along the coast in summer, and it is easy to appear in some places with high wind speed and large air volume. Every year, the accident of the
Solar Road Lights pole being blown down by the wind happens. The
Solar Road Lights occur more frequently due to wind damage. An important reason for the serious decline in the brightness of lamps. Therefore, what we Ruichen New Energy should consider when choosing
Led Solar Road Lights is not only its beauty and function, but also the wind and dustproof functions of its
Solar Road Lights and light poles. Safe use in the facility to facilitate people's travel and production and life.
1.
Solar Road Lights.
The lamp is an important part of
Solar Road Lights. The quality and opening method of the lamp are very important. The material must be aluminum casting alloy, and the thickness must meet the requirements. The lamp body is not allowed to have cracks and voids. The joints of each component should have good contact points. , The buckle part is the most important. In the past, due to the unreasonable design of the buckle, a large number of
Solar Road Lights would be damaged after each strong wind. Therefore, add a spring buckle to the Solar Road Lights, install two, The opening of
Solar Road Lights adopts straight opening from the top, and the important parts such as ballasts are fixed on the lamp body to prevent safety accidents caused by the parts falling off after the lampshade is damaged.
2. Light poles at
Solar Road Lights.
The pole height of
Solar Road Lights must be selected according to the road width and usage. The wall thickness should be greater than 3.5mm, the inside and outside are hot-dip galvanized, the thickness of the galvanized layer is more than 35μm, and the thickness of the flange is more than 18mm. Reinforcing ribs are welded between the light poles to ensure the strength of the bottom of the light pole. In the past, due to the unqualified galvanization of the lamp pole and the lack of welding reinforcement, the bottom of the lamp pole was seriously corroded and blown off by the wind. Therefore, the wall thickness of the poles of
Solar Road Lights, the thickness of the galvanized layer, and whether the reinforcement is welded or not, are all important signs of whether the poles are qualified, otherwise they cannot be used.
3. Foundation.
As a hidden project in street engineering,
Solar Road Lights foundation is also very important for its windproof and overall safety. C20 is used to pour concrete first, and the anchor bolts should be selected according to the height of the light pole. The 8m light pole should be made of Φ20 bolts, with a length of 1100mm and a foundation depth of 1200mm; The light pole of Lights should use Φ22 bolts with a length of 1300mm and a base depth of 1400mm; the lower part of the base is larger than the upper part, which is conducive to the stability of the base and enhances the wind resistance.
