solar road studs used

Solar Cat Eyes¡¯s Features Surface mounted Active Road Stud providing up to 900m of visibility from high intensity LEDs,totally sustainable harnessing free solar energy from built-in solar panel
Superior solar energy harvesting & storage electronics designed to maintain light outputs throughout a full annual cycle

Solar Cat Eyes can automatically charge during daytime. Auto turn on at night and off at sunrise. Solar Cat Eyes has 6 premium quality LED Bulbs which give out a super bright light, provide up to 10 hours lighting of night. No UV rays, environment-friendly. Adding attractive decor to any space.

Led Road Stud are flashing solar cell powered LED maintenance-free lighting devices used in road construction to delineate road edges and centre lines. Embedded in the road surface, they are an electronic improvement on the traditional Led Road Stud in that they may give drivers more than a thirty-second reaction window compared with about 3 seconds for conventional reflective devices. The intense brightness of the Led Road Stud them easily visible at distances of about 900 m under favourable conditions.

Led Road Stud offer years of reliable, cost-effective roadway safety. Made of virtually indestructible cast aluminum, Led Road Studs are rated and fabricated to withstand heavy vehicles and even snowplows. Ideal for curved roads, rural traffic and as lane delineation. Installation is simple- a hole and epoxy ensure maintenance-free, grid-independent service.there are no wires to install, no batteries to replace and virtually no maintenance required over the 10+ year life of the products.

A Solar Road Stud attractively designed, with 3 flashing LED per side, completely autonomous in energy, to effectively signal accident-prone sites. Technical features Polycarbonate Solar Road Stud is fixed to the road with epoxy glue and screws (not supplied). Each side fitted with 3 flashing LED lights. A choice of white, red, yellow, green or blue LED lights.

Averaging about 100 mm square or 100 mm diameter and about 40 mm thick, units are extremely robust to avoid damage by passing vehicles, and are normally constructed of engineering plastics and polycarbonates. Use of Solar Road Stud reduces the necessity of headlight main beams and the accompanying hazard of dazzling oncoming drivers. They are also more visible in rain and fog conditions where the old type retro reflectors and Solar Road Stud are problematic. The solar cells charge batteries or capacitors during sunlit hours, over which period the flashing LEDs are turned off by a photo switch.

Superior distance visibility of road layout ahead compared to Solar Cat Eyes has Reliable all night,all year round performance,Lower lifetime costs than traditional road markings,Long lasting, carefree operation,Solar Cat Eyes can Maintains superior visibility even in poor weather conditions and on wet roads.

Ruichen Solar Road Stud and driveway reflectors are available in?White, Yellow, Red, Blue and Green. Solar Road Stud with quality reflectors they comply with Euro road lighting standards and meet ASTM standards.

The Led Road Stud, rechargeable, LED-illuminated, raised pavement marker is a low-cost, maintenance-free alternative to overhead street lighting. The Led Road Stud provides superior road / path visibility while avoiding the problems associated with battery-powered markers.It is the first and only product to offer the newest technology that leverages the capacitor unit as an energy source. Using bright LEDs, projected light from each marker can be seen up to one mile away during darkness. For night or fog use, electronics in the markers monitor ambient light levels, activating the LEDs when ambient light drops below factory preset levels.

Road Stud Light are ground lamps, used to mark potential danger zones in road traffic. Compared to passive reflectors, solar collectors are active in the dark (LED technology), which increases the visibility and marking effect up to 1000 meters. This makes Road Stud Light possible to efficiently mark neuralgic areas such as pedestrian strips, traffic islands, curves, round about, etc. The Road Stud Light RC-SRS-C2 is suitable to drive over. It is designed to install flat into the road surface, there is no danger for two-wheelers. Maintenance machines such as snow plows, sweepers etc. are also not hindered.

Smart, safe and sustainable surface mounted Solar Cat Eye. Proven to increase night time road safety. Providing a view of the road layout ahead, in the driver’s natural line of vision, well beyond the headlight beam of a vehicle.

Aluminium body shell & polycarbonate interior is installed within the road after core drilling using epoxy glue.Each side fitted with 3 flashing LED lights. A choice of white, red, yellow, green or blue LED lights. A fully charged aluminium Solar Road Stud has more than 72 hours of battery life (full charge reached after 12 hours of daylight).

The Solar Pavement Markers has 6 super flux LED`s that can be supplied as constant or flashing in all colors.With a solid construction and a 20 ton compression capacity we think Pavement Marker are one of the best in our available range for life longevity, viewing distance and charging ability in low light conditions.

Solar Pavement Markers, Delineator and Beacons were developed for road safety improvements but also can be used for many other applications such as farming applications and off grid garden decorative lighting. Solar Pavement Markers make ideal industrial quality solar post lights with the incorporation of high temperature Ni-mh batteries. We use quality long life high flux output LED`s and quality flexible noncrystalline solar panel.

A Solar Pavement Markers powered by a photovoltaic panel and firmly protected by an aluminium hull to improve the safety on the roads by visibly marking the surroundings. Technical features Solar Pavement Markers is fixed to the road with epoxy glue (not supplied).
Each side fitted with 2/3 flashing white LED lights.