solar powered solar road stud light

Solar road studs use solar cells to provide energy, no need to use power, easy to install, save labor and time, let the ground see light, energy saving and environmental protection.
Solar road studs flicker or stay on at a certain frequency at night, and human vision is more sensitive to changes.

Solar road studs can be divided into embedded type and protruding type according to the different installation positions.
The former is generally used for the center line, and the latter is generally used for the edge line. This is because the solar road studs installed on the center line have particularly high requirements for compressive performance. In order to solve this problem, the solar road studs had to be buried in the ground, and only about 5 millimeters were exposed on the ground. However, the solar road studs used in the edge line do not have particularly high requirements on the compressive performance, and they can still work effectively when they protrude from the ground.

This product is a new type of active light-emitting warning product for road traffic facilities.
Solar road studs can emit warning flashing lights at night, improve driving attention, reduce the possibility of vehicle collisions, high-efficiency solar panels.

The high visibility of the solar road stud LED helps ensure easy and safe night driving.
Solar road studs are recommended to be placed on the side of the road, easy to install and free of electricity bills.
Solar road studs are ideal for highways, parking lots and roads, providing motorists with direction to give extra time in an emergency.
Solar road studs are easy to install and require no maintenance. Auto-on and auto-off.

All RUICHEN solar road stud products have undergone high and low temperature tests and waterproof tests to ensure that the products can work normally in continuous rainstorms and flooded environments. Our solar road stud test requires the product to be submerged in water for 48 hours to pass.

Solar road stud lights, also known as solar cast aluminum road lights, reflective markers, LED road stud lights, etc., are charged by solar panels, stored in batteries, and automatically illuminated at night and when there is insufficient light in rainy and foggy weather, solar road studs are very good. Guide the vehicle in the correct direction to effectively ensure traffic safety.

This autonomous LED solar road stud is very practical when you want to illuminate road markings. During the day, the battery is charged by the solar panel on top.
At night, the solar road stud LEDs will light up for +/- 10 hours. Since the LED lighting is powered by solar energy, this solar road stud is fully autonomous. With a crush resistance of 20 KN, they are also very strong.

Solar road studs can realize synchronous flash mode, which can guide drivers in rainy, foggy and low-visibility areas, and play a role of warning and guidance. Compared with traditional plastic and cast aluminum solar studs, solar road studs have a self-cleaning function. , absorb sunlight quickly, light-emitting area is large, high brightness. High brightness, high warning, beautify the road and enhance the image of the road.

The solar road stud is a kind of indicator light installed on the road, and its function is similar to that of the road marking, but the solar road stud can emit light at night, so as to guide the road for the driving vehicle, and the use of road studs has been greatly reduced. the occurrence of traffic accidents.

Solar LED road studs are naturally charged by the sun. Once it starts to dim, the LED lights in the solar road studs automatically turn on each night.
Designed for road safety, solar road studs help reduce accidents at regional rail crossings, intersections, and provide drivers with guidance and hazard warnings in dark and inclement weather.

Solar road studs, once charged, can work continuously for more than 48 hours and have a service life of 3 to 5 years. The display mode flashes 120 times/min or is always on, and the display color is white, yellow, red, green and blue. The solar road stud display device is an ultra-bright LED, with 3 lamp beads on one side or two sides optional, over a visual distance of 500m, and the working environment is -40¡æ¡«+70¡æ.

Solar road studs are naturally charged by the sun. After dark, the LED lights in the solar road studs automatically glow for up to 10 hours a night.
Designed for road safety, solar road studs help prevent serious accidents and emit reflected light, which makes solar cat eye road studs cost-effective, easy to install, and requires absolutely no wires or maintenance.

Solar road stud LED light source, self-luminous, high brightness, long visual distance, good warning effect, LED life span exceeds 50,000 hours
The protection level of solar road studs is IP68, with good waterproof effect, which can better protect the internal components of the product

Solar road studs, also known as protruding road signs. It is a traffic safety facility.
RUICHEN Traffic produces plastic road studs, 3M road studs, ceramic road studs, glass ball road studs and solar road studs.

Solar road studs are used to mark center lines, lane boundaries, edge lines, curves, entry and exit ramps, diversion markings, road narrowing, road obstacles, etc.

The compressive strength of solar road studs is more than 20 tons, and the compressive ability is strong, and it is not easy to be damaged.
The solar road stud is independently powered, has a long service life, and is green and environmentally friendly.

Compared with ordinary reflective road studs, solar road studs have two most important characteristics: First, the luminous brightness is large. The reflective brightness of ordinary reflective road studs is only 300MCD to 400MCD, while the luminous brightness of solar road studs can reach 2000MCD, which is 6 to 7 times that of the former. Such high-intensity light can penetrate rain and fog at night, safely and effectively guiding the driver.

Henan Ruichen is an innovative manufacturer of solar safety protection products integrating R&D, production and sales. The factory price of solar road studs is directly sold, guaranteeing a first-hand manufacturer! It can be customized according to the samples, and the existing styles can be adjusted according to customer requirements without changing the mold.
The light colors of all products of solar road studs are red, yellow, blue, green, white, and can be customized according to customer requirements! Can FOB! Large consultation customer service has a preferential price!

The solar road stud is a kind of protruding road sign, which is actively illuminated and powered by solar energy.
Solar road studs are generally laid along road markings and are used at night or in rainy and foggy weather to outline road contours and improve road traffic safety.

The solar road stud itself is an electronic product. It is very difficult for its electronic components to have high compressive performance. Therefore, in general, the compressive performance of RUICHEN solar road studs is better than that of ordinary road studs. Worse. At present, according to the requirements of the relevant technical standards of the Ministry of Transport, the compressive index of solar road studs must reach 40 tons.

RUICHEN solar road studs use prism-type reflectors + warning lights, which are mainly used for road markings, highways and exits.

Although solar road studs are used on the edge of the road, they are often pressed by vehicles. Hankun uses high-quality die-cast aluminum with a static load-bearing capacity of more than 20 tons, which can protect the product to a large extent and prevent vehicles from running over the product. .The die-cast aluminum of solar road studs is wear-resistant and corrosion-resistant, which can effectively prevent the product from rusting and corroding.

Solar road studs can also generate electricity in cloudy and rainy weather.
Solar road studs are waterproof and dustproof, and have good compressive strength. They can be used in various harsh outdoor working environments. The specially designed circuit makes the product in a protected state during the day and does not emit light.

There are several ways to effectively improve the compressive performance of solar road studs: one is to use PC bulletproof material for the exposed solar panels to enhance the compressive capacity of its electronic components; the other is to use IC control as much as possible to Reduce the volume of the electronic circuit and reduce the pressure on the electronic components; the third is to design some reinforcing ribs on the shell to share the pressure on the electronic components. Ruichen solar road studs have a particularly strong compressive capacity

Solar road studs can attract the driver’s attention very well. During the day, the road studs convert solar energy into electrical energy through the solar panel and store it in the built-in lithium battery. At night, the solar road stud automatically senses and emits a flash, and the traffic cone reflects light through the reflective material.