solar flush type studs

Raised Road Stud Lights with High quality aluminum casing construction for good resistance to pressure and safty (up to 20 tons). RUICHEN road stud lights With IP68 waterproof against any types of terrible weather like a rainstorm, blizzard or daily heat.

Led Road Stud is designed to steer vehicle and pedestrian in the right direction. Or installed at the intersection as a warning to remind pedestrians and vehicles that they are slowing down. Solar powered, environmentally friendly. Led Road Stud is charged by solar panels under sunlight, automatic charging during the day. During installation, try to stay away from shadows or other shelters. Make sure the Led Road Stud are exposed to the sun.

RUICHEN Raised Led Road Stud Using 6 LEDs as light source. Solar power design,energy saving and environmentally friendly and stores power for night lighting with built-in 600mAH Ni-MH battery. Led Road Stud is recharged by solar panels under sun light, automatic charging during the day, automatic lights up at night. Automatically illuminates when night falls or with the onset of inclement weather,sensitive and smart.

High-quality aluminum alloy frame of the RUICHEN solar road stud can withstand up to 20 tons of weight, the solar road stud can be used in most roads, without fear of being crushed or damaged.Automatically charge during daytime and illuminates when night falls or with the onset of inclement weather. This road stud light is designed to guide vehicle and pedestrian to right direction.

High quality. Ruichen round led road stud Shell is PC, wear resistant to corrosion. Heavy-duty design, strong bearing force, can be used for most roads without fear of being damaged or destroyed. Energy conservation and environmental protection. led road stud Solar energy charging battery power supply, automatic charge during the day, night or poor light, automatic lighting

VISIBLE DISTANCE: At a distance of up to 1000 meters, pedestrians and motorists can find them even in foggy weather. This Raised Solar Road Stud can effectively provide the driver with a safe direction of travel.
APPLICATION: The Raised Solar Road Stud design adapts to different landscapes and styles. The striking orange color is ideal for illuminating streets, driveways, railways and more.

RUICHEN LED road stud light come on automatically as soon as it starts getting dark every night. Solar road studs have been specifically designed with road safety in mind and can help to prevent serious accidents and emit rather than reflect light.-Solar LED road studs are also know as solar raised pavement makers,solar reflective lane markers and solar warning devices.

RUICHEN solar road stud is made of advanced crystalline solar panels and high capacity battery, wireless and & no need for hand controlling. This solar road stud Charged in the daytime for 6- 8 hours under the sun, and will turn on for 12-15h at night automatically. It can last up to 40h when in cloudy or rainy day after fully charging.

Solar Road Stud with High waterproofing grade. IP68 waterproofing grade. good sealing performance. the solar road stud can be used in heavy rain
The brightness is high. A Solar road stud Light contains 8 led lights. Ordinary reflector screws need to be used with other light sources, and the anti-light intensity is low. The high intensity of light can be worn through the rain fog at night, and the safety is a little bit of guidance for the driver.
Easy to install. Flushing road surface, then use screws to fix it on the road.

RUICHEN Raised Led Road Stud making your garden or any other outdoor place more fashionable and pleasing. RUICHEN Raised Led Road Stud with High Efficiency And Long Lifetime: Compared to other solar power battery, ours is 600mAh, 8-10 hours fully charging time in the daytime. LED road studs can turn on automatically under terrible weather or at dusk and light up for more than 40 hours.

Raised Road Stud Lights Installation Steps:
1. Positioning: Firstly, use the ruler to determine the installation position, ensure that the longitudinal position of each position is on a straight line, the installation distance and design requirements shall prevail, and the installation site shall be flat, dry, clean and seamless.
2. Mixing glue: using dedicated A glue and B glue, A glue and B glue ratio is 1:1 (such as: 1 kg A glue, 1 kg B glue) glue must be evenly mixed, consistent color.
3. Applying glue: the Road Stud Lights surface should be cleaned during installation, the glue should be moderate, not only stick to the ground, but also do not overflow too much, about 40 grams of glue per lihgt, apply glue to the bottom of the road sign. Clean up the road debris after installation.
4. Patrol: check the installed Raised Road Stud Lights after two hours.
5. Road closure: It is recommended to close the road for 6 hours to ensure the curing time of the glue.

Powered by solar energy, RUICHEN Raised Led Road Stud is more environment-friendly and with light sense function, the led road stud will automatically light up when it turns dark. Guiding by this light, people will be safer on the way. Safety and convenience have fused into one with this led road stud. Safe enough to handle any road, this road stud light can be quickly installed and should never need to be touched again.

RUICHEN Solar Road Stud Viewing distance up to 500 meters, which can effectively provide the driver with safe driving direction. With large reflective light brightness. The reflective light brightness can reach 2000mcd, which is 6 times~7 times that of the ordinary road stud light, and the lamp bead is more than 6000cmd.

The Solar Road Stud is designed to lead vehicle and pedestrian to right direction. Active lighting, not only can avoid the interference of rain and fog to the greatest extent, but also can make the driver’s line of sight get rid of the dependence on the car lighting, the visual distance is farther, the effect is better.