road stud

The solar road studs can help to reduce accident at regional rail crossing, intersection and provide guidance and hazard warning to drivers in darkness and bad weathers. The solar system of aluminum road stud is conducive for reducing environmental impact and saving costs.
With more than 20 years of factory experience, solar cat eye road stud produced by our company owns competitive aluminum road stud price and offers more choice to global traffic road safety market and trustworthy partners all over the world.

Solar road studs, also known as solar cat’s eyes, use the principle of solar lighting systems to integrate a group of components such as LED light sources, energy storage batteries, and rechargeable solar panels into traditional reflective road studs.

There are several ways to effectively improve the compressive performance of solar road studs: one is to use PC bulletproof material for the exposed solar panels to enhance the compressive capacity of its electronic components; the other is to use IC control as much as possible to Reduce the volume of the electronic circuit and reduce the pressure on the electronic components; the third is to design some reinforcing ribs on the shell to share the pressure on the electronic components. Ruichen solar road studs have a particularly strong compressive capacity

Solar synchronous road studs, also known as solar synchronous protruding road signs and solar co-channel studs, refer to discretely installed solar road studs that use a uniform flickering frequency and duty cycle to work synchronously in a coordinated and unified state.
It can display the direction of the road and the location of road obstacles with the best visual effect.

RUICHEN solar road stud provide excellent visibility for longer distance, and also support wireless control system solution for applications like changeable lanes, crosswalks and solar road stud many solar road stud more various areas where need specific management.

Solar road studs can attract the driver’s attention very well. During the day, the road studs convert solar energy into electrical energy through the solar panel and store it in the built-in lithium battery. At night, the solar road stud automatically senses and emits a flash, and the traffic cone reflects light through the reflective material.

Let’s share the countermeasures for water vapor condensation inside Reflective Studs
When the moisture returns, the condensed water attached to the indoor wall causes the wall to become wet, and even forms a thin stream of water. The same is true for lighting products. The water vapor that enters the reflective studs will condense on the internal components and adhere to the components, causing long-term corrosion or erosion to the components. You need to find a way to deal with it. Then there will be condensation inside the Reflective Studs. What are the countermeasures? Let’s take a look!

In addition, I need to remind everyone that Solar Studs in the lawn area should use trapezoidal column-shaped embedded parts with a small upper mouth and a large lower mouth, and barrel-shaped embedded parts should be used for hard areas, and they should be installed under each buried lamp. Make a permeable layer of gravel and sand. Install and open the cover on the Solar Studs. After the Solar Studs is on for half an hour, cover it to keep the inner cavity of the Solar Studs in a certain vacuum state. Use the outdoor atmospheric pressure to press the lamp cover sealing ring to avoid water leakage! Hope this content is for everyone Can play a certain helpful role!

Secondly, the wire connection should be well sealed: the wiring port of the general lighting Road Stud Lights has a special sealing rubber ring and stainless steel fasteners. First, pass the cable through the rubber ring, and then tighten the stainless steel fasteners until the wire cannot be pulled out of the sealing rubber. At the same time, when the incoming wire and the lead wire are connected, a waterproof junction box must be used. After the wiring is completed, the edge of the junction box is glued and sealed or the inside is filled with glue.

First of all, it is necessary to ensure that the Road Stud Lights itself does not leak water, and the waterproof level of Solar Studs must be tested to ensure that the waterproof level is above IP67. Waterproof inspection method: Put the Solar Road Studs in a water basin, the glass surface is 5cm away from the water surface, power on for a test run for 48 hours, during which it will turn on and off for about five or six times every two hours, and check the waterproof condition under the heated and cooled state.

At present, most solar road studs use LED as the light source. The LED has a long life span, which can reach more than 100,000 hours, and the voltage is low. It is very suitable for solar road studs. In particular, LED technology has achieved its critical breakthrough, and its characteristics have been greatly improved in the past five years. At the same time, the price/performance ratio has been greatly improved.

Solar road studs, also known as buried solar road studs or embedded solar road studs, are lighting facilities embedded on the ground. Road stud light illuminates the ground and vegetation on the ground, which can make the landscape more beautiful and safer for pedestrians to pass. LED energy-saving road stud light is now used, the surface is polished stainless steel or aluminum alloy panel, high-quality waterproof connector, silicone sealing ring, tempered glass, which can be waterproof, dust-proof, leakage-proof and corrosion-resistant. To ensure unobstructed drainage, it is recommended that the lower part of the road stud light be installed with gravel.

I believe that when you walk outdoors at night, you can always see some road stud lights on the ground illuminating buildings or trees and flowers, which also brings a certain beauty to the city at night. This kind of road studs laid on the ground , Generally called solar road studs, but solar road studs are not just about laying on the ground, solar road studs also have specific official definitions, then what is solar road studs? Let’s take a look!

The design of the solar road studs for outdoor villas is very important. It should not conflict with the design of the house, but also make it waterproof. The solar road studs of the house are installed under the eaves of the semi-open house, so that it is waterproof and waterproof. It can set off its house more beautiful, and the peach wood floor is illuminated by the solar road studs, making it look warm and cozy.

A little solar studs light in the dark night makes the atmosphere warm and natural, and soft sofas and parasols are placed around the wooden table, which makes it look comfortable and comfortable. In summer evenings, you can enjoy the coolness with your family here and the surrounding children are noisy. , What a warm scene, and the dark night and the solar studs light line corresponding to make its atmosphere more beautiful.

With the implementation of the concept of energy conservation and environmental protection, more and more people are now aware of the importance of energy conservation and environmental protection. Many outdoor floor lamps have been replaced with energy-saving solar studs. So where should outdoor solar studs be installed? Let’s take a look. See it!

Ruichen Transportation has specialized in the road safety industry for more than 15 years. Solar road studs can be customized according to your requirements. As a professional solar studs supplier, we are committed to providing customers with high-quality road signs, solar road studs, reflective road signs and other solar road signs to bring customers an impeccable user experience.

The second is active light, dynamic warning. The solar studs flashes at a certain frequency at night, and its dynamic warning effect is very strong. Active lighting can not only avoid rain and fog interference to the greatest extent, but also free the driver’s sight from relying on the car lights, and the visual distance is longer and the effect is better.

One is that the luminous brightness is large. The reflective brightness of ordinary reflective road studs is only 300MCD to 400MCD, while the luminous brightness of solar road studs can reach 2000MCD, which is 6 to 7 times that of the former. Such high-intensity light can penetrate rain and fog at night and guide the driver safely and effectively.

There are several ways to effectively improve the compressive performance of motorway studs: one is to use PC bullet-proof materials for the exposed solar panels to enhance the compressive resistance of its electronic components; the other is to use IC control as much as possible. Reduce the volume of the electronic circuit and reduce the pressure on the electronic components; the third is to design some reinforcing ribs on the shell to share the pressure on the electronic components.

Therefore, in general, the compressive performance of reflective studs is worse than that of ordinary road studs. Some. At present, according to the requirements of the relevant technical standards of the Ministry of Transport, the compressive index of cats eyes roads must reach 10 tons.

If the solar road stud cannot withstand a certain pressure, it will not work normally if it is crushed after the car is rolled or impacted. Therefore, compression resistance should be the most basic condition for the normal operation of the solar road studs. The road studs itself is an electronic product. It is very difficult for the electronic components to have higher compressive performance.

Solar road studs flicker at a certain frequency at night, and human vision is more sensitive to changes, so its dynamic warning effect is very strong. Active lighting can not only avoid the interference of rain and fog to the greatest extent, but also can break away from the dependence on car lights, and the visual distance is longer and the effect is better.

The working principle of solar road studs: during the day, solar panels absorb sunlight and convert solar energy into electrical energy and store it in energy storage devices (batteries or capacitors). At night, the electrical energy in the energy storage devices is automatically converted into light energy (through photoelectric switches). Control), the outline of the road is drawn through the bright light of the LED, and the driver’s sight is induced.

Solar road studs, set along the road surface, used at night or in rainy and foggy weather, to indicate the direction of the road. It is composed of retroreflective materials, shells, solar panels, LEDs, and control devices. It has visual guidance of active light-emitting and passive light-reflecting properties. Facilities are usually used in conjunction with markings.

Solar road studs are a special application method of solar road studs. Screws or glue are added to the bottom. They are mainly used in airports, schools, intersections, gardens, mountain roads, and industrial parks to remind passers-by or passing vehicles. There is a danger ahead, pay attention to driving safety.

In various traffic safety facilities or products, solar road studs can clearly outline the contours and edges of roads in rain, fog and road bends, so as to induce the driver’s sight, thereby eliminating road safety hazards. Solar road studs can play a very important role in delineating road contours in rainy and foggy weather and at corners, inducing the driver’s sight and eliminating potential safety hazards.

Due to the continuous development of the solar road stud energy industry, in recent years, in the road safety protection projects implemented by the country, various high-tech traffic safety facilities and products have been favored by the industry. The widespread application of these traffic safety facilities and products has played an important role in improving road safety and reducing traffic accidents.

The runway end sign road stud light is a light device with strong brightness and high flicker frequency installed on the ground at both ends of the runway. It is installed at the end of the runway on a straight line perpendicular to the centerline of the runway and is green. The corresponding runway end lights are red lights.

The solar road stud lights on the side of the runway are divided into high-intensity road stud runway lights (side lights), medium-intensity road stud runway lights (side lights) and low-intensity road stud runway lights (side lights). The grounding belt road stud lights extend 750 meters on the runway from the end of the runway. The white lights are embedded in the ground to remind the pilots that this is the key area for landing and the aircraft should touch down in this area. The road stud lights on the centerline of the runway are white lights along the centerline of the runway. White runway boundary lights are installed on both sides of the runway, and they inform the pilots of the width of the runway.

The precision channel solar road stud indicator is generally 300 meters away from the runway, which can help pilots check and correct the aircraft’s approach angle and maintain a normal glide path. The system consists of multiple lamps that emit red and white light beams in the vertical direction. When the gliding angle of the aircraft is appropriate, the pilot sees white close-range lights and red long-distance lamps; when the gliding angle is too large, they see white lights; when the gliding angle is too small, they see red lights .

The solar road stud close lighting system is an extension of the flight runway. The pilot can drive the aircraft along the approach road to gradually approach the ground until it enters the runway. The length of the approach road is sometimes up to 1000 meters, the width is equivalent to the runway, and it is entirely composed of road stud lights.

When encountering an airplane taking off or landing at night, passengers should notice the solar road stud signal lights of various colors on the apron. In fact, this is only part of the airport ground lighting equipment. These lighting devices are used to transmit light information to pilots at night or in fog for taking off, judging the position in the air, entering the airport and landing to ensure flight safety.

The reliability and life span of the LEDs in Solar Studs are more important especially when LEDs are used as LCD backlight sources and large screens. The life span of the LED we evaluate does not refer to the usable period from use to damage, but refers to the duration of the LED in Solar Studs under rated power conditions when the luminous flux decays to a specified percentage of the initial value. The longer the duration, the longer the life of the LED in Solar Studs.

Considering the radiation safety of LED light source in Solar Road Stud to living beings or human body. Because LED is a narrow beam, high-brightness light-emitting element, its radiation may harm the human eye retina. Therefore, the International Electrotechnical Commission IEC applies to different occasions. The LED in the Solar Road Stud stipulates the effective radiation limit requirements and test methods, which is also an important factor for judging the quality of LEDs.

The LEDs in Solar Studs can also measure the luminous flux, axial luminous intensity, beam half-intensity angle, spectral radiation bandwidth, radiant flux, luminous efficiency, and luminous peak. Parameters such as wavelength, correlated color temperature, color purity, dominant wavelength, and color rendering index are judged.

Considering the optical performance of LEDs in Solar Studs for different applications. Since LEDs used as displays focus on visual and intuitive effects, there are no special requirements for color temperature and color rendering index. In contrast, white LEDs used for lighting pay great attention to correlated color temperature and color rendering index, because these are important indicators for creating lighting atmosphere and effects, but generally do not have special requirements for color purity and dominant wavelength. At present, various countries are formulating new LED industry standards and test methods in Solar Studs.

Judging the quality of an LED light source cannot be generalized. Because in different applications, the performance requirements of the LED products in the road stud are also different. For example, the LED light source used for display focuses on its brightness, viewing angle distribution, color and other parameters. The LED lamps used for general lighting focus on parameters such as luminous flux, color, and color rendering characteristics. In addition, we need to judge the quality of the LEDs in Motorway Studs and comprehensively evaluate the parameters of optics, electricity, and thermal radiation safety and life.

As a light source with high luminous efficiency, energy saving, long service life and easy maintenance, the LED light source in Solar Road Stud has been applied in many night scene lighting projects. However, due to the small size, high brightness, and PN junction electrical characteristics of the LED in Solar Road Stud, there are many new problems in the evaluation of the LED light source quality in Road Stud.

There are many advantages to using reflective road studs;
Ruichen Group believes that there are mainly:
1. It is safe to drive at night. People who often drive will find that even if there are street lights in the urban area, the lines on the road are difficult to see clearly. If solar road studs are installed, the line of sight can be enhanced to ensure safety.
2. In rainy days, road reflections are very dangerous, and solar road studs clarify the driving direction of the vehicle.
3. In foggy days, solar road studs can predict the road conditions ahead.

From the perspective of car users:
1. The level of social cognition is high, the car occupies a large amount, and the cognition of sreflective studs is strong enough.
2. Strong driving awareness, solar road stud defense can avoid pressing the line, and driving a car is an indispensable part of life.
3. In the driving training, train students to drive safely, cultivate safety awareness and rational awareness.

Let’s talk about the conclusion of Ruichen Group, it is only a matter of time before large-scale use or full popularization of solar reflective road studs. I think that after 2030, solar motorway studs may be widely used or fully popularized. Why is 2030? Because 2030 is about to enter a new phase of the world economy, and changes in urban infrastructure are relatively stable.

In short, Ruichen Group’s high-quality solar road stud products will escort the safe travel of people all over the world. Ensure road safety and adhere to the concept of “new energy”. Serve customers of solar energy products all over the world.

Our solar road studs are of high quality and strong enough to withstand pressure of 30-40 tons, with flashing or constant mode, and 5 colors for your choice.
Solar road studs can be commonly used in areas where traffic accidents occur frequently, and can also be used as temporary lighting equipment. No need to connect to electricity, convenient and safe.
Solar road studs can be seen one kilometer away at night, providing safety warnings for impending dangers and reducing the occurrence of traffic accidents.

Solar road studs are suitable for a series of industrial applications, such as parks, driveways, highways, mountain roads, etc., to warn drivers of upcoming traffic hazards.

Considering the optical performance of LEDs in Solar Studs for different applications. Since LEDs used as displays focus on visual and intuitive effects, there are no special requirements for color temperature and color rendering index. In contrast, white LEDs used for lighting pay great attention to correlated color temperature and color rendering index, because these are important indicators for creating lighting atmosphere and effects, but generally do not have special requirements for color purity and dominant wavelength. At present, various countries are formulating new LED industry standards and test methods in Solar Studs.

The marking line is also a kind of resin material, which is attached to the ground, and its connection with the ground has a certain limit. If the smart road stud is installed on the marking line, then the impact force of the smart road stud is completely transferred to the marking line, so that the smart road stud is easily impacted off, and the marking line will also be glued.

The construction issues of smart road studs deserve attention. With the widespread application of smart road studs in domestic high-grade highways and municipal roads, the quality and service life of smart road studs have received more attention.

Check the installation situation for 2 hours after installation to check whether there is any omission or installation skewed phenomenon.
In comparison, Ruichen Traffic is the most professional in installing solar road studs and producing road studs.

The road surface where the Reflective studs are installed should be cleaned. Use about 40-50 grams of glue and apply it on the back of the Reflective studs. Place it on the designated position, press firmly and turn it left and right to make the Reflective studs adhere to the road surface. close.

Reflective studs installation glue ratio is: A glue and B glue 1:0.7, and then add 15%-30% cement as filler. The glue is not easy to mix too much at a time, enough for one person to glue 50-70 road studs. The colloid should be stirred evenly and the color should be consistent. Each reflective studs needs about 40-50 grams of glue for bonding.

Urban road solar road studs: urban road bus dedicated lane solar road studs (including BRT), tidal lane solar road studs, urban garden landscape solar road studs, non-motorized vehicle lane solar road studs, pedestrian crossing solar road studs, urban Greenway solar road studs, intersection solar road studs, interchange turntable solar road studs, city square solar road studs, commercial street solar road studs.

Road studs on city roads, factory road road studs, parking lot road studs, underground garage road studs, campus road road studs, living quarter road studs and other construction projects.Expressway: road studs at non-slip ramps, tunnel entrance road studs, emergency lane road studs, high-speed service area entrance and exit road studs, ETC toll lane road studs, ramp road studs, channel line road studs, diversion zone road studs , Guiding arrow road studs.

The solar road studs produced by Ruichen Traffic have excellent compression resistance and high abrasion resistance. The solar road studs have a long life and have a better reflective effect on rainy nights.

Firstly, reflective studs are required to be easy to install and operate; secondly, cats eyes roads are required to have strong reflective ability, bright colors, strong reflectivity, and good visibility at night; thirdly, they have anti-skid and abrasion resistance to ensure driving safety and service life.

The safety line composed of solar road studs is mainly fixed on the surface of the road. It is exposed to the sun, rain, wind, snow and freezing, and is subject to the impact and abrasion of vehicles. Therefore, there are strict requirements on the performance of road studs.

The intelligent control method of tunnel road stud light is based on automatic control and adopts short-term traffic flow prediction theory to realize dynamic dimming control of lighting facilities in the tunnel to achieve comfortable, safe, efficient and economical lighting effects, focusing on the characteristics of energy-saving control. It reflects the requirements of green road studs lighting and pursues the ideal design goal of “lighting on demand”.

The intelligent solar road stud control method of tunnel lighting is based on automatic control and adopts short-term traffic flow prediction theory to realize dynamic dimming control of LED solar road stud lighting facilities in the tunnel to achieve comfortable, safe, efficient and economical traffic lighting effects , Focus on the characteristics of solar energy-saving control, reflect the requirements of green lighting, and pursue the ideal design goal of “lighting on demand”.

Smart tunnel entrance solar road studs and sign contour lights are used for safety lighting at the entrance of the tunnel. Intelligent control is adopted to play the role of driving safety warning and tunnel contour safety warning lights. Henan Ruichen Traffic Equipment Co, Ltd., as a professional manufacturer of solar road studs and solar traffic equipment, escorts road traffic.

Embedded road stud installation position:
1. Roadside green stones with more than four lanes back and forth, but no isolation zone in the middle and insufficient light at night;
2. At intersections/zebra crossings (deceleration reminder);
3. Sharp turns on the road;
4. Foggy areas (seaside, airport roads);
5. Roadside green stones on highways and roads without street lights;
6. The position of the guide line at the entrance and exit of the elevated and tunnel;

It is light in weight, waterproof, anti-vibration, and corrosion-resistant. The use of thicker pc material has particularly good impact strength, UV resistance, thermal stability, and flame retardancy. Ruichen embedded road studs are powered by solar energy and can work continuously for more than 48 hours with a service life of 3 to 5 years on a single charge.

Ruichen embedded solar road studs have a beautiful appearance, which can be used for road guidance and decoration purposes. It has a streamlined design with optional LED lighting frequency and flexible selection of usage scenarios. The lamp holder is made of die-cast aluminum material, and the surface is sprayed with plastic.

Traditional road studs have the disadvantages of simple appearance, light-emitting only by reflective film, small size of the base, poor fixing performance, ordinary materials, inability to withstand rolling, reflective film can not actively emit light, and poor warning effect.

Ruichen embedded solar road studs comply with GB/T29195 “General Specification for Crystalline Silicon Solar Cells for Ground Use”, GBT19813-2005 “Solar Protruding Road Signs”, JTT817-2011 “General Technical Requirements and Testing Methods for Highway Electromechanical System Equipment”, GBT247252009 “Protruding Road Signs” 》Designed and produced according to other standards, and obtained safety inspection.

With the continuous increase in the number of cars, and the pursuit of humanized signs and warnings in road design, the requirements for the use of urban power supply to work are too high, and the use of solar road studs and solar signs as transportation equipment will be The most important source. In many countries in the world, the habit of looking at markings during the day and “road studs” at night has long been formed. For example, the smart zebra crossing is one of the most typical cases.

The embedded solar road stud produced by Henan Ruichen Traffic Equipment Co, Ltd. is a kind of transportation product. It uses sunlight to obtain energy for work and uses LED as the light source. It has the advantages of energy saving, environmental protection, and convenient installation.

Road studs, a commonly used method of traffic roadblocks, are used to guide people to drive in the right direction and prevent speeding and traffic accidents. Mainly used in roads and railways.
The specifications of road studs are generally 100mm*100mm*20mm, and the maximum height does not exceed 25mm. There are many kinds of reflectors, including reflector, reflector beads, led light, reflective film and so on.

Experimental research shows that the highway service area parking management system based on intelligent road studs provided by this scheme has the advantages of saving existing investment, environmental protection and energy saving, and creatively applying the intelligent road studs and light guidance system technology of geomagnetic measurement to high-speed Highway.

The smart road stud gateway of the collection and distribution lane sends a control command to the solar smart road stud, and the smart road stud changes The color of the flashing indicator light guides the vehicle to enter the corresponding parking space. The corresponding parking zone spike and gateway also make corresponding control changes according to the location of the vehicle and the location of the vacant parking space to guide the vehicle to park in place.

The above data is provided by the service area road solar studs. After the gateway is collected, it is analyzed and judged by the parking management system of the service area to determine the vacant number of parking spaces, and feed the data to the smart road stud gateway of the collection and distribution lane.

The highway service area parking management system structure based on smart solar road studs. The solar smart road studs in the collection and distribution lanes are used to detect whether there are vehicles passing through the lanes, and the vehicle type is preliminarily determined through the road stud gateway.

one smart road stud is installed on the diagonal of the bus parking space and on both sides of the center line, and a road stud gateway is added to the central part of the bus parking space area for data collection and analysis. Data collection and analysis; a set of parking management system servers and gateways and related software systems are set up in the service area computer room for management, analysis and release of parking space information.

Install a smart road stud, add a road stud gateway in the center of the car parking space area for data collection and analysis; install a smart road stud on the diagonal of the large truck parking space and on both sides of the center line, and install a smart road stud in the large truck parking space A road stud gateway is added to the central part of the area for data collection and analysis.

According to the above ideas, add a pair of smart solar road studs every 3 meters on each side of the collection and distribution lane, and add a road stud gateway at the entrance and exit of the collection and distribution lane for data collection and analysis; add each on the diagonal of the car parking space.

The smart solar road stud mainly uses the Bluetooth BLE protocol to design and develop the master-slave node and gateway of the road stud based on Bluetooth communication technology, which realizes the data collection and transmission of the smart solar road stud node, as well as the data collection and arrangement of the parking data network, and then builds A wireless bluetooth network oriented to the parking area application in the service area-a star network with a gateway as the main node and smart road studs as the secondary node.

Based on this, a Bluetooth linear scatter network for parking guidance and parking space management is designed. The solar smart road stud has a three-color flashing indicator. Normally it is flashing yellow, parking space is occupied or vehicles passing by flashing red, and vehicle guidance status is flashing green.

Compared with other wireless sensor nodes and devices, this intelligent node has the characteristics of miniaturization and light weight on the basis of powerful functions. The road studs are easy to install, do not need to damage the road surface of the parking space, and are extremely easy to install and maintain. After the spikes are installed, the detection and management of the parking space can be realized at any position in the parking space.

the road stud system uses high-efficiency solar energy collection and management technology. It can maintain the detection, collection and wireless transmission functions of the intelligent node for a long time. No need to replace the battery, up to 10 years of working life.

A single node integrates a three-axis geomagnetic sensor with a minimum sensitivity of 0.5uT and a sampling rate of up to 300Hz. The solar road stud system can operate normally under low power consumption, and on this basis, there is also an optional sleep state with extremely low power consumption. It also has a very short startup time and can be quickly shut down after data transmission, which also makes the entire system power consumption lower.

And use the chain wireless network of the road stud smart node to build an integration and management system for ultra-long-distance roadside parking or ultra-large-scale parking. The system has free scalability, flexibility, and can achieve large-scale at a lower cost Monitoring has great application prospects. Intelligent solar road studs integrate advanced micro-sensor technology.

The intelligent road stud system of Henan Ruichen Traffic Equipment Co, Ltd. uses the intelligent wireless sensor node P-Node to integrate advanced micro-sensing technology, micro-power processor technology, low-power wireless communication technology, high-efficiency solar energy collection and Management technology to realize effective detection and management of parking spaces.

Take China’s expressway west service area as an example, combined with the current status of China’s existing expressway service areas, using monitoring systems such as smart solar spike systems and variable information information boards to effectively monitor and manage the parking lot of the service area, from the area Internal parking space management, parking space occupancy, and vehicle entry guidance are managed to effectively improve the service level of the service area during peak periods.

After the vehicle passes, the cylindrical reflector can be restored to the original designed working position due to the elastic force of the special rubber. When the cylindrical reflector cannot be restored to the original designed working position, the solar road studs loses its marking function and becomes invalid. Therefore, fatigue is one of the important indicators of road studs.

Highway solar road studs are shown in the figure. The cylindrical reflector on it can reflect moonlight, daylight, and light to form obvious signs. Its working principle is: when a vehicle changes lanes on the highway, it may be removed from the studs. After passing, the cylindrical reflector is compressed and shrunk below the loop surface.

Highway solar road stud are a patented alternative to highway markings, which can overcome the defects of poor highway markings and easy damage, improve road transportation management, and can be widely used in modern high-grade highways.

After the road studs are cured for 4 hours, remove and install the isolation facilities.
The installation of road studs is not a complicated matter, but there are many details that need attention. These details play a very important role in ensuring the quality requirements and service life of road studs.

Install on the marking line. The marking line is also a kind of resin material, which is also attached to the ground, and its connection with the ground has a certain limit. If the road stud is installed on the marking line, the impact force of the road stud is completely transferred to the marking line. In this way, the road stud is easily impacted off, and the marking line will also be glued.

With the widespread application of road studs in high-grade highways and municipal roads around the world, the quality and service life of road studs have received more attention. However, in the actual application process, the spikes are damaged and the service life is reduced due to installation problems. Henan Ruichen Traffic Equipment Co, Ltd. has summarized the problems that often occur during the installation of road studs based on years of production and construction experience, and proposed a reasonable installation method. I hope to discuss with colleagues in the transportation industry.

What problems will be encountered in the installation of solar road studs? Henan Ruichen Traffic Equipment Co, Ltd. will share with you the problems encountered in installation and related knowledge with more than ten years of industry experience.

The mounting holes of the road studs are shallow and thin. This is mainly for cast aluminum spikes with feet. Cast aluminum spikes with feet have better impact resistance, compression resistance, and longer service life because of their partial penetration into the ground. However, during the installation process, if the hole position is too shallow or too thin, the bottom surface of the spike will not be in full contact with the ground, which will affect the firmness of the bonding.

It is further divided into manual spikes and mechanical spikes. Hand-made road studs are made by hand, with different dimensions, but the price is low, and the goods are generally shipped per ton. Machine-made road studs are manufactured by machine manufacturing through forging, heat treatment, threading and other processes. Regardless of the shape, size and availability, it is the best choice, but the price is slightly higher, and the goods are generally delivered individually.

There are also two types of plastic and plastic shells. All-plastic means that the shell is all made of plastic injection molding. The material may be ABS, AS+ glass fiber, etc., and has high compressive strength. It is generally called all-plastic road stud. The plastic shell means that the shell is plastic and the interior is filled. The cost of such a road stud is lower than that of all plastic, but at the same time the compressive strength is not so high. It is generally called a plastic road stud or a plastic-filled road stud.

There are two types of cast aluminum and cast aluminum shells. All-cast aluminum means that the shell is made of metal and has a relatively high compressive strength. It is generally used at the double yellow line and is generally called all-aluminum road studs. Cast aluminum shell means that the shell is cast aluminum and the interior is filled. The cost of such a road stud is lower than that of full cast aluminum, but at the same time the compressive strength is not so high. It is generally called cast aluminum road stud or cast aluminum filled road stud.

Road studs, a commonly used method of traffic roadblocks, are used to guide people to drive in the right direction and prevent speeding and traffic accidents. Mainly used in roads and railways.
The specifications of road studs are generally 100mm*100mm*20mm, and the maximum height does not exceed 25mm. There are many kinds of reflectors, including reflector, reflector beads, led light, reflective film and so on.

The solar road studs produced by Ruichen have always been sold with inherent characteristics such as safety without hidden dangers, energy saving and consumption, environmental protection, easy installation, automatic control and maintenance-free, and various engineering constructions directly bring obvious advantages that can be used.

Solar cell modules generally use monocrystalline silicon or polycrystalline silicon solar cell modules; solar road stud heads generally use high-power LED light sources; solar road stud controllers are generally placed in the light pole, with light control, time control, overcharge and overdischarge protection and reverse connection protection, more advanced controllers have the function of adjusting lighting time in four seasons, half-power function, intelligent charging and discharging function.

Quick Details:
Place of Origin:Henan, China, Brand Name:RuiChen, Model Number:RC-SRS-D5,
Name:Led solar road stud rate, Power supply:Solar panel( monocrystalline 2.5V/0.25W),
Battery:NI-MH1.2V/600mA or lithium battery, Working model:constant or blinking,
LED Color:White Green Red Yellow Blue, Waterproof:IP68, Load capacity:>30T,
Size:L102*W102*H23mm, Quality:ASTM D4280 & EN1463-1 standard, Visual distance:>800m,
Supply Ability:10000 Piece/Pieces per Week.
Packaging & Delivery:
Packaging Details:2pcs/box, 60pcs/ctn, weight: 21kgs, carton size:58.5*24.5*18.5cm,
Excellent warning effect blinking road stud solar road marker round, Port ShenZhen/HK.”

Quick Details:
Place of Origin:Henan, China, Brand Name:RUICHEN, Model Number:RC-SRS-B1,
Name:Led solar road stud price, Battery:NI-MH 1.2V/600MAH or Lithum battery 3.2V/500MA,
Material:PC Anti-UV, Water proof:IP68, Power supply:High Efficient monocrystalline 5V/0.4W,
Road Stud Solar LED:Ultra bright diameter 5mm(6pcs or 10pcs), Load capacity:20ton static,
LED Color:Red, Yellow, Green, Blue, White, Visual distance:>800m,
Working hours:140hours for blinking and 40hours for constant after fully charged.
Supply Ability:10000 Piece/Pieces per Week.
Packaging & Delivery:
Selling Units:Single item, Single package size: 14X14X6 cm, Single gross weight:0.370 kg,
Package Type:New product constant or blinking round plastic mini led solar road stud cat eye pavement marker solar light driveway, 2pcs/box, 60pcs/ctn, weight: 19kgs, carton size: 67.5*28*20cm.”

Quick Details:
Place of Origin:Henan, China, Brand Name:RUICHEN, Model Number:RC-SRS-B1,
Name:Led solar road stud manufacturer, Battery:NI-MH 1.2V/600MAH or Lithum battery 3.2V/500MA,
Material:PC Anti-UV, Water proof:IP68, Power supply:High Efficient monocrystalline 5V/0.4W,
Road Stud Solar LED:Ultra bright diameter 5mm(6pcs or 10pcs), Load capacity:20ton static,
LED Color:Red, Yellow, Green, Blue, White, Visual distance:>800m,
Working hours:140hours for blinking and 40hours for constant after fully charged.
Supply Ability:10000 Piece/Pieces per Week.
Packaging & Delivery:
Selling Units:Single item, Single package size: 14X14X6 cm, Single gross weight:0.370 kg,
Package Type:New product constant or blinking round plastic mini led solar road stud cat eye pavement marker solar light driveway, 2pcs/box, 60pcs/ctn, weight: 19kgs, carton size: 67.5*28*20cm.”

Quick Details:
Place of Origin:Henan, China, Brand Name:RUICHEN, Model Number:RC-SRS-C1,
Name:Led solar road stud in USA, Power supply:High Efficient Solar Panel(2.5V/0.3W ),
Load capacity:30tons static, Battery:NI-MH 600mah(high temperature resistance),
Material:Aluminium+PC, Water proof:IP68, road stud solar LED:Ultra bright diameter 10mm(4pcs or 6pcs),
LED Color:Red, Yellow, Green, Blue, White, Visual distance:>1000m,
Working hours:140hours for blinking and 40hours for constant after fully charged.
Packaging & Delivery:
Selling Units:Single item, Single package size: 13X13X5.7 cm, Single gross weight:1.000 kg,
Package Type:IP68 waterproof LiFePO4 battery road safety lights,
24pcs/ctn, weight: 17kgs, carton size: 43*25*28CM/57*41*23.5CM.”